Roof Membrane Adhesive; Used To Bond Moisture Absorbent Substrates; Water Based Acrylic; 1 Gallon Can; Single

• Used To: Bond Moisture Absorbent Substrates
• Type: Acrylic Water Based
• Unit Size: 1 Gallon
• Unit Type: CAN
• Unit Quantity: Single

Water based Acrylic Bonding Adhesive Environmentally and user safe. Special formulation allows for longer open time. Designed for use on moisture absorbant substrates and not on metal or fibreglass.

This material is to be used on porous substrates only. Stir thoroughly before use and keep covered when not in use.

Surface Preparation: Clean, dry surfaces are required for optimum bond strength.

Application Methods: Apply adhesive evenly at a rate of one gallon for every 160-180 square feet to thte substance by short nap roller.

Open Time: EPDM Rubber and TPO membranes should be immediately rolled onto the adhesive. No waiting time is necessary. Care should be taken to minimize the air trapped between substrates.

Bonding: Mate the surfacs with only enough pressur, evenly applied, to insure good contact between the substrates. Excessive pressure can redistribute the adhesive in an uneven manner.

Empty containers: When “empty” this package may contain harmful vapor and residue. Do not reuse container or remove labels. Follow label warning even “empty”.  Disposal should be in accordance with applicable regulations.

Keep From Freezing. Store products at 50° F to 60° F for maximum storage life. Do not store below 40° F.

Features & Benefits

• Three-Part Roofing System That Features The Roofing Membrane, Bonding Adhesive And Lap Sealant
• Specially Formulated To Be Environmentally And User Safe
• Provides Excellent Coverage And Is Easy To Apply
• Is Designed For Use On Moisture-Absorbent Substrates — Not On Metal Or Fiberglass
• No Supplier Warranty